AutoCodes
 
OBDII Code List
 
P3004 TOYOTA

P3004 TOYOTA - Power Cable Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

P3004 TOYOTA Possible Causes

  • Faulty Inverter With Converter Assembly
  • Inverter With Converter Assembly harness is open or shorted
  • Inverter With Converter Assembly circuit poor electrical connection

First diagnose P3004 TOYOTA code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

P3004 TOYOTA Tech Notes

Toyota recently released a warranty enhancement for 2010-2014 Prius, extending the coverage of the inverter/converter Intelligent Powertrain Module.

Toyota Bulletin Information:
Toyota has received some reports where the Intelligent Power Module (IPM) located inside the inverter assembly of the hybrid system may fail. This condition is indicated by hybrid system diagnostic trouble codes (DTCs): P0A94, P324E, P3004, and/or P0A1A. If one or more of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter fail safe mode.
Although the Hybrid Inverter assembly is covered by Toyota’s New Vehicle Limited Warranty for 8 years or 100,000 miles (whichever occurs first), we at Toyota care about the customers’ ownership experience. Toyota is now extending the warranty coverage for repairs related to failure of the Intelligent Power Module (IPM).

Cost of diagnosing the P3004 TOYOTA code

    Labor: 1.0

    The cost of diagnosing the P3004 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

P3004 TOYOTA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P3004 Toyota Description

If the inverter voltage is not decreased after discharge with the ignition switch OFF, the VM sensor in the inverter is determined as defective. The ECU sets the OBDII code when HV battery voltage becomes lower than inverter voltage.
OBDII Code P3004 Toyota - Power Cable Malfunction - AutoCodes.com

P3004 TOYOTA More Information

Need more information on how to fix the P3004 TOYOTA code?
Get Access to Factory Service Manuals

Need more help?

Get the P3004 Toyota code diagnosed by a professional: Find a repair shop in your area

Related Information

P3004 TOYOTA Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P3004 Toyota code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧