P2123 CHEVROLET - Accelerator Pedal Position Sensor 1 Circuit High Voltage
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
- Faulty Electric Throttle Control Actuator
- Engine Light ON (or Service Engine Soon Warning Light)
P2123 Chevrolet DescriptionThe Accelerator Pedal Position (APP) sensor is made up of 2 sensors that are housed inside one assembly. The Engine Control Module (ECM) supplies a separate 5-volt reference circuit and a low reference circuit for each of the sensors. The 5-volt reference for APP sensor 1 is supplied from the same source in the ECM as the 5-volt reference for the mass air flow (MAF) sensor and the fuel tank pressure (FTP) sensor. The 5-volt reference voltage for all of the sensors is supplied on separate ECM terminals, but the terminals are connected internally to a voltage supply. The APP sensor 1 sends a signal from the sensor to the ECM indicating the accelerator pedal position. The ECM actuates the throttle plates based on this information. If the ECM detects that the APP sensors are not within a predicted value from each other, DTC P2123 sets.
Need more help?Get the P2123 Chevrolet code diagnosed by a professional: Find a repair shop in your area
P2123 CHEVROLET CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2123 Chevrolet code? Have you replaced any parts?
Any information is appreciated. Thanks