P1219 CHEVROLET - Throttle Position Sensor Reference Voltage
P1219 CHEVROLET Possible Causes
- Faulty Throttle Position (TP) Sensor
- Throttle Position (TP) Sensor harness is open or shorted
- Throttle Position (TP) Sensor circuit poor electrical connection
How do I fix code P1219 CHEVROLET?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P1219 CHEVROLET code
Labor: 1.0The cost of diagnosing the P1219 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P1219 CHEVROLET DescriptionThe Throttle Position (TP) Sensor is mounted on the throttle body of the Throttle Actuator Control (TAC) assembly. The sensor is actually 2 individual throttle position sensors within 1 housing. Two separate signal circuits, a low reference circuit, and a 5-volt reference circuit are used in order to connect the TP sensor assembly and the TAC module. The TP sensor signal voltage increases as the throttle opens. The signal circuit for TP sensor is pulled up to 5-volt reference voltage.
More InformationNeed more information on how to fix the P1219 CHEVROLET code?
Get Access to Factory Service Manuals
Need more help?Get the P1219 Chevrolet code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1219 Chevrolet code? Have you replaced any parts?
Any information is appreciated. Thanks