| All About OBDII Engine Codes
AutoCodes - Dodge - P0302 Dodge

P0302 Dodge Code - Cylinder Misfire Fault Detected

- Code Popularity: 72,649 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
By - Updated May 02, 2021
Share on Facebook   Share on Twitter   Share on Linkedin

|Code P0302 Dodge Possible Causes

  • Faulty spark plug 2
  • Clogged or faulty fuel injector 2
  • Faulty ignition coil 2
  • Fuel injector 2 harness is open or shorted
  • Fuel injector 2 circuit poor electrical connection
  • Ignition coil 2 harness is open or shorted
  • Ignition coil 2 circuit poor electrical connection
  • Insufficient cylinder 2 compression
  • Incorrect fuel pressure
  • Intake air leak

|How do I Fix the Code P0302 Dodge?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your Dodge have Safety Recalls? → Check here

|Code P0302 Dodge Tech Notes

The P0302 code means that cylinder 2 is misfiring or is randomly misfiring. Start by checking for intake leaks and if no leaks are found the next step is to replace the spark plugs on cylinder 2. If the problem persists more tests need to be done to diagnose the problem, see "Possible Causes".

|What is the Cost to Diagnose the Code P0302 Dodge?

Labor: 1.0

The cost of diagnosing the P0302 Dodge code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|When is the Code P0302 Dodge Detected?

Engine Cylinder 2 is Misfiring.

|What are Code P0302 Dodge Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/loss of power
  • Hard start
  • Engine hesitation

|Code P0302 Dodge Description

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.

OBDII Code P0302 Dodge - Cylinder Misfire Fault Detected  -
P0302 Dodge Code - Cylinder Misfire Fault Detected

|Need More Information on the P0302 Dodge Code?

Need more information on how to fix the P0302 Dodge code? Get Access to Factory Service Manuals

|Need Help with the P0302 Dodge Code?

Get the P0302 Dodge code diagnosed by a professional: Find a repair shop in your area

|Code P0302 Dodge comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0302 Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks