AutoCodes - Hyundai - P0300 HYUNDAI

P0300 HYUNDAI Code - Random/Multiple Cylinder Misfire Detected

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P0300 HYUNDAI code possible causes

  • Faulty spark plug (s)
  • Faulty ignition coil (s)
  • Clogged or faulty fuel injector (s)
  • Intake air leak
  • Fuel injectors harness is open or shorted
  • Fuel Injectors circuit poor electrical connection
  • Ignition coils harness is open or shorted
  • Ignition coils circuit poor electrical connection
  • Insufficient cylinders compression
  • Incorrect fuel pressure

|How do I fix the P0300 HYUNDAI code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0300 HYUNDAI code tech notes

The P0300 code means that a cylinder(s) is misfiring or is randomly misfiring. Start by checking for intake leaks, intake gaskets are commonly caused by multi-cylinder misfiring. If no leaks are found the next step is to replace the spark plugs. If the problem persists more tests need to be done to diagnose the problem, see "Possible Causes".

There is a factory service bulletin for the following Hyundai models:

Hyundai Accent (MC)
Hyundai 2003-2006 SULEV Elantra (XD)
Hyundai 2004-2008 Tiburon 2.0L (GK)
Hyundai Tucson 2.0L (JM)
Hyundai Elantra (HD)
Hyundai Elantra Touring (FD)
Hyundai Genesis Coupe (BK)
Hyundai Sonata (NF)
Hyundai Santa Fe
Hyundai Sonata (NF)
Hyundai Santa Fe (CM)
Hyundai Azera (TG)
Hyundai Veracruz (EN)
Hyundai Entourage (EP),
Hyundai Genesis Coupe (BK)
Hyundai Genesis Sedan (BH)Genesis Sedan (BH)

The bulletin provides information on how to inspect and diagnose problems related to the Oil Control Valve (OCV) used in Constant Variable Valve Timing (CVVT), if at any time the OCV is suspected as the caused of rough idling, poor acceleration, camshaft timing misalignment-related trouble codes, misfire-related trouble codes.

Factory Service Bulletin: Hyundai Constant Variable Valve Timing Oil Control Valve Inspection OBDII Code P0300

User Submitted Video

|Cost of diagnosing the P0300 HYUNDAI code

Labor: 1.0

The cost of diagnosing the P0300 HYUNDAI code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0300 HYUNDAI code detected?

The control module monitors the crankshaft speed and has detected a misfire condition

|What are P0300 HYUNDAI code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/loss of power
  • Hard start
  • Engine hesitation

|P0300 HYUNDAI code description

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.
OBDII Code P0300 Hyundai - Random/Multiple Cylinder Misfire Detected -

|Need more information with the P0300 HYUNDAI code?

Need more information on how to fix the P0300 HYUNDAI code?
Get Access to Factory Service Manuals

|Need help with a P0300 HYUNDAI code?

Get the P0300 Hyundai code diagnosed by a professional: Find a repair shop in your area

|P0300 HYUNDAI code comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0300 Hyundai code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
1=Easy 2=Moderate 3=Hard What is this?