P0171 2006 CHEVROLET TRAIL BLAZER Code - Fuel Trim System Lean Bank 1
|P0171 2006 CHEVROLET TRAIL BLAZER code possible causes
- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection
|How do I fix the P0171 2006 CHEVROLET TRAIL BLAZER code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|P0171 2006 CHEVROLET TRAIL BLAZER code tech notesIf the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persists the front oxygen (O2) sensor may need to be replaced.
2006 Trailblazer P0171
User Submitted Video
|Cost of diagnosing the P0171 2006 CHEVROLET TRAIL BLAZER code
Labor: 1.0The cost of diagnosing the P0171 2006 CHEVROLET TRAIL BLAZER code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P0171 2006 CHEVROLET TRAIL BLAZER code detected?- Fuel injection system does not operate properly.
- The amount of mixture ratio compensation is too small. (The mixture ratio is too lean.)
|What are P0171 2006 CHEVROLET TRAIL BLAZER code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Excessive Fuel Consumption
|P0171 2006 CHEVROLET TRAIL BLAZER code descriptionThe Engine Control Module (ECM) controls the air/fuel metering system in order to provide the best possible combination of driveability, fuel economy, and emission control. Fuel delivery is controlled differently during Open Loop and Closed Loop. During Open Loop, the ECM determines fuel delivery based on sensor signals without heated oxygen sensor (HO2S) input. During Closed Loop, the ECM adds HO2S inputs to calculate the short and long term fuel trim (FT) adjustments. If the HO2S indicates a lean condition, the fuel trim values will be above 0 percent. If the HO2S indicates a rich condition, the FT values will be below 0 percent. The short term FT values change rapidly in response to the HO2S voltage signals. The long term FT makes coarse adjustments in order to maintain an air/fuel ratio of 14.7:1.
|Need more information with the P0171 2006 CHEVROLET TRAIL BLAZER code?Need more information on how to fix the P0171 2006 CHEVROLET TRAIL BLAZER code? Get Access to Factory Service Manuals
|Need help with a P0171 2006 CHEVROLET TRAIL BLAZER code?Get the P0171 2006 Chevrolet Trail Blazer code diagnosed by a professional: Find a repair shop in your area
|P0171 2006 CHEVROLET TRAIL BLAZER code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0171 2006 Chevrolet Trail Blazer code? Have you replaced any parts?
Any information is appreciated. Thanks