C0329 CHEVROLET - Transfer Case Encoder Signal Circuit Low
- Faulty Transfer Case Encoder
- Transfer Case Encoder harness is open or shorted
- Transfer Case Encoder circuit poor electrical connection
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C0329 Chevrolet DescriptionThe transfer case encoder is a switch that converts a shaft position, representing a mode or range position, into electrical signals for use by the transfer case shift control module. The encoder houses 4 Hall effect sensors that are used for channels P, A, B, and C. These sensors provide a path to ground when a magnet, which is part of the shift rail, passes over them.
The transfer case shift control module supplies an 8-volt reference and a ground circuit for the encoder Hall effect sensors to function.
The transfer case shift control module supplies 5 volts on all the channels. As these channels are pulled to ground, the module can interpret the location of the transfer case shift position.
This DTC detects an open, short to ground, or a short to voltage in the encoder feed circuit, an open in the signal ground circuit, an open, short to ground, or short to voltage in the Encoder channel circuits.
Need more help?Get the C0329 Chevrolet code diagnosed by a professional: Find a repair shop in your area
C0329 CHEVROLET CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the C0329 Chevrolet code? Have you replaced any parts?
Any information is appreciated. Thanks