Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the B2133 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The memory function switches are normally open and are wired directly to the to the Memory Mirror Module (MMM). When a memory recall switch is pressed, the switch pulls the 5 V signal circuit from the MMM low. The MMM senses that a memory recall signal was pulled low and a class 2 message is sent out to the Memory Seat Module (MSM) identifying that the circuit is active. In response to this message, the MSM performs the requested function. If a memory recall switch circuit is active for more than 30 continuous seconds, the circuit will be considered shorted and the MMM will set this Diagnostic Trouble Code (DTC).
Need more information on how to fix the B2133 code? Get Access to Factory Service Manuals
Get the B2133 code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B2133 code? Have you replaced any parts?
Any information is appreciated. Thanks