B1395 Code - Control Module Voltage Reference Output Circuit Voltage
|B1395 code possible causes
- Faulty Heating, Ventilation, and Air Conditioning (HVAC) Control Module
- Heating, Ventilation, and Air Conditioning (HVAC) Control Module harness is open or shorted
- Heating, Ventilation, and Air Conditioning (HVAC) Control Module circuit poor electrical connection
|How do I fix the B1395 code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|B1395 code tech notesB1395 03: Control Module Voltage Reference Output Circuit Voltage Below Threshold
B1395 07: Control Module Voltage Reference Output Circuit Voltage Above Threshold
|Cost of diagnosing the B1395 code
Labor: 1.0The cost of diagnosing the B1395 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are B1395 code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|B1395 code descriptionThe windscreen temperature and inside moisture sensor integrates the relative humidity sensor, windscreen temperature sensor and humidity sensing element temperature sensor. This sensor assembly provides information about relative humidity level on inside windscreen, temperature of the inside windscreen and temperature of the humidity sensor element.
The relative humidity sensor measures the relative humidity on the compartment side of the windscreen. It also detects the temperature of the windscreen surface on the compartment side. Both values are used as control inputs for the Heating, Ventilation, and Air Conditioning (HVAC) Control Module application to calculate the fog risk on windscreen compartment side and ability to reduce fuel consumption by decreasing A/C compressor power to a minimum without causing any fog. The sensor will also enable partial recirculation mode in order to improve heat-up performance of the passenger compartment under cold ambient temperature conditions without the risk of mist build-up on the windscreen. The humidity sensor element temperature sensor supplies the temperature of the humidity sensor element. It is only needed if the thermal contact between the humidity sensing element and the inside windscreen surface is not sufficient.
|Need more information with the B1395 code?Need more information on how to fix the B1395 code? Get Access to Factory Service Manuals
|B1395 code information for specific makes
|Need help with a B1395 code?Get the B1395 code diagnosed by a professional: Find a repair shop in your area
|B1395 code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1395 code? Have you replaced any parts?
Any information is appreciated. Thanks