AutoCodes - OBDII Code List - B0968
B0968 - Parking Aid On/Off Switch Indicator Circuit
Table of contents
Share:
B0968 Possible Causes
- Faulty Parking Assist Switch
- Parking Assist Switch harness is open or shorted
- Parking Assist Switch circuit poor electrical connection
- Faulty Parking Assist Switch Indicator
- Faulty Parking Assist Control Module
How do I fix code B0968?
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B0968 code
Labor: 1.0
The cost of diagnosing the B0968 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B0968 Description
The parking assist can be activated/deactivated by pressing the parking assist switch. By engaging the drive or reverse gear the parking assist can also be activated. By subsequently pressing the parking assist switch the parking assist can be disabled again. The indicator in the parking assist switch shows the status of the parking assist. If the lamp is ON, the parking assist is activated.
More Information
Need more information on how to fix the B0968 code?Get Access to Factory Service Manuals
Information for specific makes
- B0968 BUICK Parking Aid On/Off Switch Indicator Circuit
- B0968 CADILLAC Parking Aid On/Off Switch Indicator Circuit
- B0968 CHEVROLET Parking Aid On/Off Switch Indicator Circuit
- B0968 GMC Parking Aid On/Off Switch Indicator Circuit
Comments
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B0968 code? Have you replaced any parts?Any information is appreciated. Thanks