B0790 - Transfer Case Neutral Indicator Circuit
B0790 Possible Causes
- Faulty Transfer Case Select Switch
- Transfer Case Select Switch harness is open or shorted
- Transfer Case Select Switch circuit poor electrical connection
- Faulty Transfer Case Shift Control Module
How do I fix code B0790?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B0790 code
Labor: 1.0The cost of diagnosing the B0790 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B0790 DescriptionThe neutral indicator circuit consists of an ignition 3 voltage circuit and a neutral indicator control circuit. When the neutral mode is selected, current is supplied to the neutral indicator by the ignition 3 voltage circuit, traveling through the neutral indicator LED, at which time the transfer case shift control module supplies the ground through the neutral indicator control circuit. This Diagnostic Trouble Code (DTC) detects an open, short to ground or a short to voltage.
More InformationNeed more information on how to fix the B0790 code?
Get Access to Factory Service Manuals
Information for specific makes
Need more help?Get the B0790 code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B0790 code? Have you replaced any parts?
Any information is appreciated. Thanks