AutoCodes.com | All About OBDII Engine Codes
AutoCodes - Generic - U0111

U0111 Code - Lost Communication With Battery Energy Control Module 'A'

- Code Popularity: 27,078 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
Share on Facebook   Share on Twitter   Share on Linkedin

What are the Possible Causes of the DTC U0111?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • Faulty Battery Energy Control Module 'A'
  • Battery Energy Control Module 'A' harness is open or shorted
  • Battery Energy Control Module 'A' circuit poor electrical connection
⚠ Does your Car have Safety Recalls? → Check here

How to Fix the DTC U0111?

Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.

Search for U0111 Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0111 code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

Code U0111 Description

A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Operating information and commands are exchanged among the devices. The devices have programmed information about what messages are needed to be exchanged on the serial data circuits. CAN bus uses two dedicated wires for communication. The wires are called CAN high and CAN low. When the CAN bus is in idle mode, both lines carry 2.5V. When data bits are being transmitted, the CAN high line goes to 3.75V, and the CAN low drops to 1.25V, thereby generating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Battery Energy Control Module 'A' has not been received.

OBDII Code U0111 - Lost Communication With Battery Energy Control Module 'A' - AutoCodes.com
U0111 Code - Lost Communication With Battery Energy Control Module 'A'

Need More Information on the Code?

Need more information on how to fix the U0111 code? Get Access to Factory Service Manuals

Information for Specific Makes

  • U0111 Buick Lost Communication With Battery Energy Control Module
  • U0111 Cadillac Lost Communication With Battery Energy Control Module
  • U0111 Chevrolet Lost Communication With Battery Energy Control Module
  • U0111 Ford Lost Communication With Battery Energy Control Module 'A'
  • U0111 GMC Lost Communication With Battery Energy Control Module
  • U0111 Lincoln Lost Communication With Battery Energy Control Module 'A'
  • U0111 Mercury Lost Communication With Battery Energy Control Module 'A'

Need Help with the Code?

Get the U0111 code diagnosed by a professional: Find a repair shop in your area

Code U0111 comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U0111 code? Have you replaced any parts?
Any information is appreciated. Thanks