P2626 HYUNDAI - HO2S Pumping Current Trim Circuit/Open Bank 1 Sensor 1
Repair Importance Level:
Repair Difficulty Level:
- HO2S Bank 1 Sensor 1 harness is open or shorted
- HO2S Bank 1 Sensor 1 circuit poor electrical connection
- Faulty HO2S Bank 1 Sensor 1
When is the code detected?
The PCM monitors front HO2S tip temperature and signal at the same time to check open ciurit of Pumping Current Trim Circuit. The PCM sets DTC P2626 if front O2 tip temerature is lower than the predetermined threshold and if front HO2S signal after oscillator off is lower than the predetermined threshold.
If the same error code is set in the next driving cycle, the PCM illuminates the MIL.
- Engine Light ON (or Service Engine Soon Warning Light)
P2626 Hyundai Description
The linear O2 sensor is mounted on the front side of the Catalytic Converter (warm-up catalytic converter) or in the front exhaust pipe. It detects a wide range of air/fuel ratios in the exhaust gas from the rich to lean regions. This linear O2 sensor produces a current that corresponds to a specific air/fuel ratio. The PCM monitors this signal and determines whether the air/fuel mixture is rich or lean. The PCM constantly monitors the linear O2 sensor and increases or decreases the fuel injection duration using this signal. This is called closed-loop fuel control operation.
Need more help?
Do you need more help with the P2626 Hyundai code? ask a question to our users or find an automotive repair shop near you to help you
with yout repair
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2626 Hyundai code? Have you replaced any parts?
Any information is appreciated. Thanks