P0460 FORD - Fuel Level Sensor 'A' Circuit
- Fuel Level Sensor harness is open or shorted
- Fuel Level Sensor circuit poor electrical connection
- Faulty combination meter
2003-2004 Ford Crown Victoria
2003-2004 Ford Crown Victoria Factory Service Bulletin OBDII Code P0460
For some Ford vehicles.
P0460 can be caused by the installation of aftermarket equipment such as remote starter systems and auxiliary fuel tanks.
Ford offers a remote starter system which is recommended. If the vehicle has an aftermarket remote starter system, it would need to be removed / disabled before diagnostics for P0460 can be started. Auxiliary fuel tanks that continuously replenish the vehicles main tank will cause a P0460. Customers that replenish the vehicles fuel tank from the auxiliary fuel tank while the key is on and engine is running, can set P0460. For vehicles with an auxiliary fuel tank, it is recommended not to use the gravity / continuous fill style auxiliary fuel tanks. It is recommended to add fuel to the vehicles main tank with the key off.
NOTE: P0460 CAUSED BY AFTERMARKET EQUIPMENT/VEHICLE MODIFICATIONS IS NOT COVERED UNDER WARRANTY.
- Fuel level gauge improper operation
The fuel level sensor is mounted in the fuel level sensor unit. The sensor detects a fuel level in the fuel tank and transmits a signal to the Engine Control Module (ECM). The fuel level sensor consists of two parts, one is mechanical float and the other side is variable resistor. The fuel level sensor output voltage changes depending on the movement of the fuel mechanical float.
P0460 1998 FORD F150
P0460 1999 FORD F150
P0460 2000 FORD F150
P0460 2001 FORD F150
P0460 2002 FORD F150
P0460 2003 FORD F150
P0460 2006 FORD FUSION
P0460 2007 FORD FUSION
P0460 2008 FORD FUSION
P0460 2009 FORD FUSION
P0460 2010 FORD FUSION
P0460 2011 FORD FUSION
P0460 2012 FORD FUSION
Engine light is comingh on code is showing p0460 I have erased code will it come back on and how wil...
Just replaced a leaking fuel pump in the tank. Now the Fuel gauge is stuck at the full position. T...
I have replaced orig. alternator at 11500m and approx. 1 month later Im getting a PO460 code. I have...
Any information is appreciated. Thanks