P0452 PONTIAC - Fuel Tank Pressure Sensor Circuit Low Voltage
Repair Importance Level:
Repair Difficulty Level:
- Fuel Tank Pressure Sensor harness is open or shorted
- Fuel Tank Pressure Sensor circuit poor electrical connection
- Faulty Fuel Tank Pressure Sensor
On most Pontiac vehicles the sensor is on top of the fuel tank. The P0452 code may set when replacing the fuel filter, AutoCodes.com user recommends disconnecting the car battery before replacing the fuel filter.
When is the code detected?
An excessively low voltage from the sensor is sent to Engine Control Module (ECM).
- Engine Light ON (or Service Engine Soon Warning Light)
P0452 Pontiac Description
The fuel tank pressure sensor responds to changes in fuel tank pressure. Vacuum is consider negative pressure. The information supplied by the fuel tank pressure sensor to the Engine Control Module (ECM) is used in order to detect vacuum decay or an excessive vacuum during the EVAP diagnostic routine.
The fuel tank pressure sensor signal voltage to VCM varies from a minimum of about 0.1 volts with pressure in the fuel tnk to greater than 4.0 volts with high vacuum in fuel tank.
- P0452 PONTIAC -
P0452 Pontiac Grand Am GT 1998
The only real symptom is smells like gas real bad sometimes, and the...
Need more help?
Do you need more help with the P0452 Pontiac code? ask a question to our users or find an automotive repair shop near you to help you
with yout repair
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0452 Pontiac code? Have you replaced any parts?
Any information is appreciated. Thanks