P0402 FORD - Exhaust Gas Recirculation Flow Excessive Detected
- Faulty EGR volume control valve
- EGR solenoid valve harness is open or shorted
- EGR solenoid valve circuit poor electrical connection
- Faulty EGR temperature sensor and circuit
2000-2002 Ford Taurus
2001-2002 Ford Crown Victoria
2001-2002 Ford Focus
2001-2002 Ford Mustang
2001 Ford Explorer USPS
2001-2002 Ford E Series
2001-2002 Ford Escape
2001-2002 Ford Expedition
2001-2002 Ford Explorer Sport Trac
2001-2002 Ford Explorer Sport
2001-2002 Ford F-150
2001-2002 Ford Ranger
2001-2002 Ford Windstar
2002-2003 Ford Explorer
Ford Factory Service Bulletin OBDII Code P0402 Code
User Submitted Video
- Possible engine hesitation
Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Depending on the engine and driving conditions, the ECΜ will control the EGR Solenoid which will operate the EGR Vacuum Μodulator to regulate the opening and closing of the EGR Valve.
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECΜ. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECΜ does not issue the pulse signal. Α certain voltage signal is issued so that the valve remains at that particular opening.
P0402 1998 FORD F150
P0402 1999 FORD F150
P0402 2000 FORD F150
P0402 2001 FORD F150
P0402 2002 FORD F150
P0402 2003 FORD F150
P0402 2006 FORD FUSION
P0402 2007 FORD FUSION
P0402 2008 FORD FUSION
P0402 2009 FORD FUSION
P0402 2010 FORD FUSION
P0402 2011 FORD FUSION
P0402 2012 FORD FUSION
p0402 code engine has a miss at mid speed i already changed the egr valve ...
I change the egr and the rpms went high what can I do to fix it...
Check engine code po402 changed dpfe sencer starts stumbles then dies...
How do I go about fixing these codes?...
I have a P402 code on my E350. It started shaking/rattling while on the road then shut off. I was ab...
Any information is appreciated. Thanks