Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
EGR flow malfunction could be caused by a clogged EGR valve or EGR tube. Before replacing any parts try cleaning the EGR valve, tube and passages. If the tubes are clean you may have to replace the EGR Pressure sensor to fix the problem.
To diagnose the P0401 2008 Ford Fusion code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.
Low EGR flow control is detected
The EGR system is monitored during steady state driving conditions while the EGR is commanded on. The test fails when the signal from the differential pressure feedback EGR sensor indicates that EGR flow is less than the desired minimum.
Need more information on how to fix the P0401 2008 Ford Fusion code? Get Access to Factory Service Manuals
Get the P0401 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0401 2008 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks