Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
The P0174 code means that more air than gasoline is detected in the exhaust gases exiting the combustion chamber. If the P0174 is set in along with the P0171 code, it is highly likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the Mass Air Flow (MAF) Sensor. If the problem persists the MAF or Front Heated Oxygen (O2) Sensor will need to be replaced.
Click Here to Learn What is Bank 1 and Bank 2
There are Factory Service Bulletins for the following Cadillac models:
2000-2013 Cadillac All Models:
2000-2013 Cadillac Factory Service Bulletin OBDII Code P0174
2007 Cadillac Escalade, Escalade ESV, Escalade EXT
2007 Cadillac Escalade Factory Service Bulletin OBDII Code P0174
To diagnose the P0174 Cadillac code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.
The Engine Control Module (ECM) controls a Closed Loop air/fuel metering system to provide the best possible combination of drivability, fuel economy, and emission control. The ECM monitors the Heated Oxygen Sensor (HO2S) signal voltage and adjusts the fuel delivery based on the signal voltage while in Closed Loop. A change made to the fuel delivery changes the long and short-term fuel trim values. The short-term fuel trim values change rapidly in response to the HO2S signal voltages. These changes fine-tune the engine fueling. The long-term fuel trim values change in response to trends in the short-term fuel trim. The long-term fuel trim makes coarse adjustments to fueling to re-center and restore control to short-term fuel trim. The ideal fuel trim values are around 0 %. A positive fuel trim value indicates that the ECM is adding fuel to compensate for a lean condition. A negative fuel trim value indicates that the ECM is reducing the amount of fuel to compensate for a rich condition. The Diagnostic Trouble Code (DTC) will be set when the average long-term fuel trim weighted average value is greater or less than a calibrated value.
Need more information on how to fix the P0174 Cadillac code? Get Access to Factory Service Manuals
Get the P0174 Cadillac code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0174 Cadillac code? Have you replaced any parts?
Any information is appreciated. Thanks