Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Check for blockages between the fuel tank, the EVAP Canister Purge Solenoid Valve, and the engine intake manifold. Check for obstructions in the EVAP Canister Purge Solenoid Valve diaphragm and ports.
Search for P1443 Questions and Answers: Search here →
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1443 code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.
What are Code Possible Symptoms?
Engine Light ON (or Service Engine Soon Warning Light)
Code P1443 Description
The Powertrain Control Module (PCM) monitors the fuel tank pressure. The Diagnostic Trouble Code (DTC) will set when the PCM detects a fuel tank pressure change greater than minus (-) 7 inches of water in 30 seconds occurred with a purge, fuel vapor, flow at less than 0.02 lb/min (0.15 gm/s).
P1443 Code - Evaporative Emission System Control Valve Low/No Flow
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P1443 code? Have you replaced any parts? Any information is appreciated. Thanks