P0156 - O2 Sensor Circuit Malfunction Bank 2 Sensor 2
- Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
- High Fuel Consumption
- Excessive Smoke from Exhaust
The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.
P0156 FORD O2 Sensor Circuit Malfunction Bank 2 Sensor 2
P0156 HYUNDAI HO2S Circuit Bank 2 Sensor 2
P0156 KIA HO2S21 Circuit Fault
P0156 LEXUS HO2S22 Circuit Malfunction
P0156 MAZDA Rear HO2S Signal Out Of Calibrated Limits
P0156 MERCEDES-BENZ O2 Sensor Circuit Malfunction Bank 2 Sensor 2
P0156 MITSUBISHI Oxygen Sensor Circuit Malfunction Bank 2 Sensor 2
P0156 SCION HO2S22 Circuit Malfunction
P0156 TOYOTA HO2S22 Circuit Malfunction
P0156 VOLKSWAGEN HO2S22 Sensor Range/Performance Condition
TRYING TO FIND OUT WHAT THESE DTC P1564...
i have a 2003 ford windstar there are 3 codes i can not find they are ..p0156.p2272.p2273.:)...
Eng light on with code PO156. Replaced o2 sensor did not fit. Measure o2 sensor voltages with scanne...
Any information is appreciated. Thanks